Call Us Now

+44 (0) 1793 840 840

was successfully added to your cart.

Cross reference guide

Can I cross refer heat shrink tubing part descriptions?

By |

Many people ask us to cross refer heat shrink tubing part numbers.  If you have a description from another supplier or manufacturer and you would like to cross-refer this to a PMG Company product then please contact us.

If you already now the product description, then the table below gives a quick and easy cross reference guide:

Cross refer heat shrink tubing part numbers and product families

PMG CompanyRaychem
/Tyco
DSG-CanusaHellerman Sumitomo3MLG
LTF100CGPTDERAY HF2 (2)GSHS-1625G
PLF100RNF-100DERAY ITF21B2FP 301GSHS-1635F
PLF103RNF-3000CPX-300TF31B2 (3X)SFTW-203GSHS-3635
PLF100 GYSDCPTCPX201GYSGSHS-635Y/G
PLDW100ATUMDERAY IAKTEPSW3B2EPS 300GSHS-3635W
PLDW104ATUMCPA 100W3B2EPS 300GSHS-4635WT
PLK175RW-175 / KYNARDERAY KY175TK20KKYNARGSHS-1675
PLDR100DR-25DERAY V25PST-MLD-DRET
PLM100(A)MWTMCFMLG-PMWT
PLT100(A)WCSM
PLV200RW-200 / VITONDERAY VT220VITON EFR3VTN 200GSHS-1650F
LTF100-VVERSAFITCPX876F2 (2)
TFE-250TFEDERAY PTFETFETFE
PLZH100ZH-100C2T200TR27NH
PPSVERSALEX
PPS-FRVERSALEX-FR
PLCE100(A)SSCCCAP-FR/RLSKE
PMG CompanyAlphaFiniSHRINKShrintekHilltopCableorganser 
LTF100FIT 221-2CSPHSP1HS2
PLF100FIT 221CMSPHSP2
PLF103FIT 321VCMX3SP3XHSP3
PLF100 GYSFIT 260CYGSP
PLDW100FIT 321CDW3XSPDWDWAHS3E
PLDW104FIT 321CDW4XSPDWDWAHS4A
PLK175FIT 350CKSKHKYHSKY2
PLDR100SHDRSE 150HDRHSDR
PLM100(A) MA    
PLT100(A)      
PLV200FIT 650SVVITON
LTF100-VFIT 221 TWCSPHILVERS
TFE-250FIT 500SPTFESTFEHPTFHSPTFE
PLZH100SHFZH-100
PPSHILLFLEX
PPS-FR
PLCE100(A)MECEnd Caps

For more information on how to cross refer heat shrink tubing part numbers, please contact using the form below:

Enquiry Form

  • This field is for validation purposes and should be left unchanged.
Heat Shrink and Braid Cut Lengths

Can You Supply Your Products In Cut Lengths?

By |

Can you supply your products in cut lengths?

Here at PMG Company we have our own in-house cutting shop that enables us to supply cut lengths on the vast majority of our various tubings and sleevings.  These products can be cut to almost any length you require and we can control the cutting very closely allowing for tight tolerances to be adhered to.

Customer requirements are becoming ever more complex and it’s clear that additional support is required.  That’s why PMG Company took the decision to set up a range of additional services, key to the list is the cutting shop.  It give you, our customers the flexibility you require.

If you need a braided or a heat shrinkable sleeving product in cut lengths or supplied cut to a specific tolerance, then look no further. Our ‘in house’ cutting shop is equipped with a range of specialised cutting machines including:

  • Hot knife cutters – for cutting braid and prevent fraying.
  • Standard vertical blade cutters – for accurate and clean heat shrink sleeve cutting
  • Tolerance cutters – for tight cut length tolerances, as well as controlled angle of the cut.
  • High volume commercial – used for high quantity runs

As a standard offering, our cut length service is available in bags of 100 pieces, 250 pieces, 500 pieces and 1000 pieces as standard.   Obviously, for bulk enquiries or small batch runs, we are happy to help and the numbers can be customised where needed.

For more information on our cutting services, please click here.

For all your cut length requirements please contact us using the form below:

Enquiry Form

  • This field is for validation purposes and should be left unchanged.