PLCE100A Heat Shrink End Caps
PLCE100A end caps are commonly used to seal the ends of plastic, rubber, or paper insulated wires and cables. They are manufactured from a modified polyolefin material and internally lined with a hot-melt adhesive to provide a watertight seal against the damage of moisture, dirt or corrosion.
Theses caps will provide a seal at up to 0.05 Mpa internal pressure, whilst operating at temperatures between -55ºC to +110ºC. Their ruggedized and extremely durable wall makes them exceptionally hard wearing and gives, promoting excellent abrasion and cut through resistance
Up to 0.05Mpa Internal Pressure
Continuous Operating Temperature -55°C to +110°C
Optional Adhesive Liner
Good Chemical and Abrasion Resistance
|Ordering Size (mm)||Minimum ID Supplied (mm)||Maximum ID Recovered (mm)||Length as Supplied (mm)||Recovered Wall Thickness (mm)|
|GeneralInstallation temperatureLow temperature flexibility||125°C 14Mpa|
|ElectricalDielectric strength||15kV/mm minimum|
|ThermalHeat ageingElongation at Break||168 hours at 150°C>300%|
|ChemicalFluid resistance||FuelsHydraulic fluidsOils 23°C to ISO1817|
Standard colour: Black
Full details on technical specifications, test methods and values are available on request.