HRBM100 Thin Wall Medical Grade Heat Shrink

HRBM100 is a thin wall medical grade polyolefin heat shrink tubing especially suited for medical applications requiring lubricity, flexibility and excellent electrical properties. It is a cost effective alternative to FEP and is compatible with gamma and ETO sterilisation and has USP Class Vl approval.

To buy or find out more about this product, please complete the enquiry form below.

SKU: HRBM100 Category: Tags: , ,

HRBM100 is a medical grade polyolefin heat shrink tubing especially suited for medical applications requiring lubricity, flexibility and excellent electrical properties  The product is commonly used on surgical instruments such as electrotomes and endoscopes, but can also be used in other surgical devices where the properties required are similar.

HRBM100 tubing is a cost-effective alternative to FEP and is qualified to the stringent requirements of USP Class VI, and as such is approved for use ‘in-body’, making it ideal for medical and surgical devices such as Endoscopes and electrotomes.  The product can be sterialsed using either Gamma or ETO methods and has a continuous operating temperature of 105°C .

HRBM100 features and benefits

  • 2.5:1 Shrink Ratio
  • Thin Wall
  • FDA USP Class VI approval
  • ISO 10993 approved
  • Very flexible and translucent
  • Compatible with Gamma and ETO sterilisation methods
  • Excellent abrasion resistance
  • Excellent chemical resistance
  • Operating temperature: -55°C to +105°C
  • Low temperature shrinkage – will start to recover at 60°C
  • Minimum full recovery temperature:  110°C

Technical Data

PropertySpecification RequirementTest MethodTypical Value
Longitudinal change0±10%ASTM D 2671Pass
Concentricity70%min.ASTM D 2671≥70%
Tensile strength10.4Mpa min.ASTM D 638≥10.4Mpa
Volume resistivity≥1015Ω.cmASTM D 2671≥1015Ω.cm
Dielectric strength≥19.7KV/mmASTM D 2671≥20KV/mm
Elongation at break≥120%ASTM D 638≥140%
Heat shock(180℃,4hrs)No crackingASTM D 2671Pass
Cold bend(-55℃,4hrs)No crackingASTM D 2671Pass

Ordering Details

Ordering Size (Inches)Minimum ID Supplied (mm)Maximum ID Recovered (mm)Recovered Wall Thickness (mm)Standard Spool Size (m)
1.01.000.450.25 ± 0.05200
2.02.000.800.25 ± 0.05200
3.03.001.200.25 ± 0.05200
6.06.002.400.25 ± 0.05100
10.010.004.000.36 ± 0.05100

Standard approved colours: Black and transparent.
Non-standard approved colours: Red, orange, yellow, blue and white.
Other colours to special quotation Full details on technical specifications, test methods and values are available on request.

Additional information

Colour

Supplied Diameter (mm)

, , , ,

Length (m)

, ,